View NHD-50-800480TF-ATXI_8629293.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

nhd-5.0-800480tf-atxi# tft (thin-film-transistor) color liquid crystal display module nhd - newhaven display 5.0- 5.0 diagonal 800480- 800xrgbx480 pixels tf- model a- built-in driver / no controller t- white led backlight x- tft i- 6:00 viewing angle, wide temp # rohs compliant newhave n di splay international, inc. 2511 technology drive, suite 101 elg in il, 60124 ph: 847-844-8795 fax: 847-844-8796 www.newhavendisplay.com nhtech@newhavendisplay.com nhsales@newhavendisplay.com
567

-
-

,/ 00

- 1 20$02

-
-,,, 34
$)51)!$-
+%6 - !&/7
!/
51
8 !&*
-
-

/

/
[3]
[4] pin description pin no. symbol external connection function description 1 led- led power supply ground for backlight 2 led+ led power supply backlight power supply (20ma @ ~ 23.1v) 3 gnd power supply ground 4 vdd power supply power supply for lcd and logic (3.3v) 5-12 [r0-r7] mpu red data signals 13-20 [g0-g7] mpu green data signals 21-28 [b0-b7] mpu blue data signals 29 gnd power supply ground 30 clkin mpu clock for input data (rising edge) 31 stbyb mpu 1: normal operation; 0: standby mode 32 hsync mpu line synchronization signal 33 vsync mpu frame synchronization signal 34 de mpu data enable signal 35 nc - no connect 36 gnd power supply ground 37 xr - no connect 38 yd - no connect 39 xl - no connect 40 yu - no connect recommended lcd connector: 0.5mm pitch 40-conductor ffc. molex p/n: 54132-4097 backlight connector: on lcd connector mates with : ---
[5] electrical characteristics item symbol condition min. typ. max. unit operating temperature range top absolute max -20 - +70 ? c storage temperature range tst absolute max -30 - +80 ?c supply voltage vdd 3.0 3.3 3.6 v supply current idd vdd=3.3 - 132 - ma h level input vih 0.7vdd - vdd v l level input vil 0 - 0.3vdd v h level output voh vdd-0.4 - - v l level output vol - - gnd+0.4 v backlight supply voltage vled - 23.1 - v backlight supply current iled vled=23.1v - 20 25 ma backlight power consumption pbl - 924 - mw optical characteristics item symbol condition min. typ. max. unit viewing angle Ctop cr 10 - 50 - ? viewing angle Cbottom cr 10 - 70 - ? viewing angle C left cr 10 - 70 - ? viewing angle C right cr 10 - 70 - ? contrast ratio cr 500 600 - luminance y l - 250 - cd/m 2 response time (rise) tr - - 5 15 ms response time (fall) tr - - 15 30 ms driver information built-in hx8264-d02 source driver: http://www.newhavendisplay.com/app_notes/hx8264-d02.pdf built in hx8664-b gate driver: http://www.newhavendisplay.com/app_notes/hx8664-b.pdf
[6] timing characteristics
[7] horizontal timing vertical timing
[8] parallel 24-bit rgb mode input clock and data timing source output timing
[9] vertical timing hv (cascade) vertical timing de (cascade) gate output timing
[10] vertical timing hv (dual gate) vertical timing de (dual gate) gate output timing (dual gate)
[11] power on/off sequence enter/exit standby mode sequence
[12] quality information test item content of test test condition note high temperature storage endurance test applying the hig h storage temperature for a long time. +80?c , 200hrs 2 low temperature storage endurance test applying the lo w storage temperature for a long time. -30?c , 200hrs 1,2 high temperature operation endurance test applying the electric stress (voltage & current) and the high thermal stress for a long time. +70?c 200hrs 2 low temperature operation endurance test applying the electric stress (voltage & current) and the low thermal stress for a long time. -20?c , 200hrs 1,2 high temperature / humidity operation endurance test applying the electric stress (voltage & current) and the high thermal with high humidity stress for a long time. +60?c , 90% rh , 96hrs 1,2 thermal shock resistance endurance test applying the el ectric stress (voltage & current) during a cycle of low and high thermal stress. -20?c,30min -> 25?c,5min - >70?c,30min = 1 cycle 10 cycles vibration test endurance test applying vibration to simulate transportation and use. 10-55hz , 15mm amplitude. 60 sec in each of 3 directions x,y,z for 15 minutes 3 static electricity test endurance test applying elect ric static discharge. vs=800v, rs=1.5k, cs=100pf one time note 1: no condensation to be observed. note 2: conducted after 4 hours of storage at 25 ?c, 0%rh. note 3: test performed on product itself, not inside a containe r. precautions for using lcds/lcms see precautions at www.newhavendisplay.com/specs/precautions.pdf warranty information and terms & conditions http://www.newhavendisplay.com/index.php?main_page=terms

▲Up To Search▲

Price & Availability of NHD-50-800480TF-ATXI

	To Download NHD-50-800480TF-ATXI Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .